|
Post by musicman3512 on Sept 1, 2022 11:53:07 GMT
Hi all.
I have a problem since I installed PCUAAE on my A500 mini, I explain: When I switch-on A500 mini with the USB key is plugged into the A500 mini, it works. PCUAE launches, no worries.
On the other hand, when I switch-on A500 mini with no USB key to have the A500 mini in "normal" mode: The red LED is fixed, the screen remains black, then the A500 mini ends up turning off. So, impossible to boot on the A500 mini without a USB key, as if in boot it was *only* looking to boot on a USB key.
Could you please help me find my original A500 mini without PCUAAE ?
Thank you all for your help.
MusicMan3512.
My Machine is:
A500 Mini PAL FW v 1.0.0
|
|
|
Post by vic2020ian on Sept 1, 2022 16:25:45 GMT
Have you tried booting into PCUAAE and deactivating Auto Boot?
|
|
|
Post by musicman3512 on Sept 1, 2022 22:51:33 GMT
It's worse. Now, my A500 mini does not boot anymore. It seems to be bricked.
|
|
|
Post by musicman3512 on Sept 1, 2022 23:12:16 GMT
It's like if the firmware was corrupted.
|
|
|
Post by jj0 on Sept 2, 2022 8:37:49 GMT
|
|
|
Post by musicman3512 on Sept 2, 2022 10:50:34 GMT
Can we have a result by having an A500 mini that turns off after 5 seconds? I understood in the link of the tutorial that the A500 mini must remain under power. In my case, it shut down automitacaly after few seconds : RED light and black screen......... then stop.
|
|
|
Post by jj0 on Sept 2, 2022 10:56:38 GMT
Can we have a result by having an A500 mini that turns off after 5 seconds? I understood in the link of the tutorial that the A500 mini must remain under power. In my case, it shut down automitacaly after few seconds : RED light and black screen......... then stop. I think so, with the UART connected you can see the boot messages and also interrupt the boot process, load my modified kernel from USB and explore the filesystem and restore tbe firmware. There is no guarantee of course, if it is a hardware issue then the UART adapter won't help.
|
|