|
|
Post by masticman on May 5, 2022 20:24:30 GMT
After updating from an earlier Amiga mode version I cant play WHDLoad Xenon2 ( and other games ) any more, the games loads and the music plays but the controller becomes non responsive of which could also be a low memory problem after the last tweaks. I know Xenon2, Xenon22disk didn't work previously but Xenon21disk used to work great. I can load Xenon2 CDTV but the music has been ripped out so its not very good. I have also got an earlier version of Amiga mode installed on the usb and can easily switch back And forth by just renaming the Amiga folder of which is not ideal but usable for now. Any help on getting the current version of Amiga mode working with this game would be greatly appreciated  |
|
|
|
Post by masticman on May 6, 2022 21:00:05 GMT
I'm using the latest amiga-mode-pack-1.9.1b4, the Xenon2-1disk game worked on 1.7.6b8 but not on the latest version unfortunately. Most other games I have tried through Tiny loader seems to work ok. Shame about this one. I am reinstalling packs 2 & 3 again just to make sure nothing got corrupted in the transfer. Also when changing from GL to SDL upon reboot the message " Volume Workbench1.3 is not validated" appears and for how long I leave it after reboot it does not go away. The boothdf file that tiny loader uses has become corrupt for some reason. Its running out of memory on quite a few games ive tested on tiny loader and its corrupting the boothdf file. Ctrl & F7 to reset does not work and switching display drivers can again corrupt the boothdf file which could be running out of memory issues. Ctrl & restore resets the machine but again it corrupts the boothdf file which tiny loader uses. Hopefully Nick can sort it |
|
|
|
Post by masticman on May 7, 2022 12:15:18 GMT
Couldn't get it to work again unfortunately, a bit stuck now mate. EDIT - reverted back to pcuae1.8.5bf10 and Amiga mode 1.8.0b1 and all is working sweet again. Changing to SDL also works on this version without trashing the boothdf file. Safest way to exit Amiga mode without trashing the boothdf file of which Tiny loader uses for the wdhload games. Press Ctrl & F7 to restart (does not work for me on the latest Amiga mode) Go back into tiny launcher menu Press ctrl & F3 for pcuae mode Hope this helps if anyone else has any problems  |
|
|
|
Post by spannernick on May 10, 2022 11:40:26 GMT
Sorry about the problems you been having, been busy with PCUAAE for the A500 Mini so now its out the door I might be able to look at Amiga Mode and fix it now.
`Volume Workbench1.3 is not validated` do you have a led light on your USB or if you use a SD Card, when this happens to me, you can see the led light on the SD Card Reader flashing, if you wait for it to stop maybe wait 2 to 5 minutes, so the led light is on continuously then when you press retry and then WB will load, do not know why this happens.
|
|
|
|
Post by masticman on May 10, 2022 12:29:17 GMT
Sorry about the problems you been having, been busy with PCUAAE for the A500 Mini so now its out the door I might be able to look at Amiga Mode and fix it now. `Volume Workbench1.3 is not validated` do you have a led light on your USB or if you use a SD Card, when this happens to me, you can see the led light on the SD Card Reader flashing, if you wait for it to stop maybe wait 2 to 5 minutes, so the led light is on continuously then when you press retry and then WB will load, do not know why this happens. No need to apologise mate your work is fantastic and I dont mind testing things. The games tend to lock up during music intro during the oading of WHD load games ( try 1942) via tiny launcher & using the latest verision of Amiga mode, when this happens i cannot reset the Amiga via F7 and everything just locks up. When i take the usb out and have a look on the PC the wboot file has become read only and seems corrupted, thats why i though it was retroarch running out of memory and trashing it as it can with the cfg file. This does not happen on amiga mode 1.8.0b1. No matter how many times i press retry it cannot access the wbootfile on my Maxi. I have a usb hub with a sandisk 32gb low profile usb stick and when the light stops the bootfile is still corrupted and I then have to recoppy it over for the error message to go away & for things to start working again. I have also tested with 3 other branded memory sticks to see if one of mine was starting to fail. I have also tried the latest Amiga mode 1.9.1b4 with PCAUE 1.8.5bf10 and it still locks up so those last tweeks of Amiga mode must have changed something down the line as it doesnt seem to be anything to do with PCAUE. |
|
